Home› Articles› Techo-Bloc vs Unilock vs Permacon
Brand Comparison · Updated November 2026

Techo-Bloc vs Unilock vs Permacon (2026 GTA Guide)

13 min read Written by the Reliable Hardscapes team Featured image: tup-brand-lineup-hero.jpg

Techo-Bloc, Unilock, and Permacon are the three Canadian paver manufacturers we rely on for nearly every interlocking driveway we build across the GTA, and the honest answer up front is that none of them is simply "the best." Entry-level lines from all three run roughly $5 to $10 per square foot in material cost, and flagship premium lines run $11 to $17 per square foot — before installation. Once base prep, demolition, and labour are added, a properly installed driveway using any of the three brands lands in the same $25 to $55 per square foot installed range, because the paver itself is typically only 18–28% of the total project cost. The real differences between the three brands come down to where they're made, how they're engineered, and which product lines fit your home's look — not which one survives an Ontario winter, because all three meet the same freeze-thaw standards. Here's how they actually compare.

Quick answer — how the three brands compare

All three brands pass the same Ontario winter durability test, so the decision between them is really about origin, product range, and look rather than which one will survive longer in your driveway.

For a deeper technical dive into what "winter-ready" actually means — water absorption, compressive strength, and ASTM freeze-thaw ratings — see our guide to the best pavers for Ontario winters, which covers the specific product lines in more detail than this brand-level comparison does.

Head-to-head: specs, pricing, and manufacturing

Here's how the three manufacturers stack up at the brand level, using the flagship entry and premium lines each is known for in the GTA.

BrandManufacturedMaterial cost / sq ftAbsorption rangeCompressive strengthKnown for
Techo-BlocSaint-Hubert, QC & Pen Argyl, PA$5 – $153.2% – 4.1%8,800 – 9,200 psiWidest colour/texture selection, StainGuard & ColourGuard
UnilockBrampton, ON$6 – $173.4% – 4.3%8,600 – 9,500 psiOntario-made, Reala & EasyClean, best natural-stone look
PermaconQuebec$7 – $163.0% – 3.8%9,000 – 9,800 psiLowest absorption, best large-format modern

Every number here lands comfortably inside what Ontario's freeze-thaw climate demands: absorption under 5%, compressive strength above 8,000 psi, and a passing ASTM C1782 rating. The spread between the three brands is narrower than the spread within any single brand's own product line.

Quick check: If a quote names a paver brand without a specific product line — just "Techo-Bloc" or "premium pavers" — ask which line. The difference between a brand's entry and premium products is 2–3x the material cost, and it's the line, not just the brand, that determines the final look and price.

Techo-Bloc — the widest range, entry to ultra-premium

Techo-Bloc has been our most-installed paver brand across the GTA for over a decade, and the reason is breadth: there's a Techo-Bloc line at almost every price point and aesthetic.

Manufactured in Saint-Hubert, Quebec and Pen Argyl, Pennsylvania, Techo-Bloc applies proprietary surface treatments — StainGuard (factory stain protection) and ColourGuard (UV-resistant pigmentation) — across its product range. Industria ($5–$8/sq ft) is the workhorse entry line found on most mid-range GTA driveways, available in a dozen-plus colour blends. Borealis ($8–$11/sq ft) steps up to a cleaner modern aesthetic popular on pool decks and contemporary builds. Blu Slate ($11–$15/sq ft) is the flagship — a richly textured, large-format paver with a slate-like surface that's often mistaken for natural stone.

Best for: homeowners who want the broadest colour and pattern selection at every budget tier, and contractors (including us) who need flexibility across a wide range of client budgets within one trusted brand.

Unilock — Ontario-made, refined for this climate

Unilock is the only one of the three brands manufactured in Ontario, and that matters for more than hometown pride — fifty-plus years of refining a product specifically for GTA freeze-thaw conditions shows up in the engineering.

Founded in Toronto and manufactured in Brampton, Unilock's premium lines use Reala (a granite-like surface technology) and EasyClean (factory-applied stain protection). Brussels Block ($6–$9/sq ft) is the most-installed Unilock product on GTA driveways — a classic tumbled paver with decades of local track record. Umbriano ($10–$14/sq ft) offers a modern, smooth-textured, granite-flecked surface. Beacon Hill Flagstone ($13–$17/sq ft) is the flagship — a textured paver that mimics natural Yorkshire flagstone and is our top recommendation for luxury, estate-style driveways.

Best for: homeowners who want a genuinely local manufacturer and the most convincing natural-stone aesthetic on the market, particularly for traditional and transitional architecture.

Permacon — the density leader

Permacon's manufacturing process consistently produces the densest pavers of the three brands we install, which translates directly into the lowest water absorption rates and the strongest performance on paper.

A Quebec-based manufacturer, Permacon is particularly strong in large-format pavers and modern architectural aesthetics. Mondrea ($7–$10/sq ft) is a modular system combining multiple paver sizes for flexible patterns at a mid-range price. Newport ($12–$16/sq ft) is the flagship — a 24"×24" large-format paver with an absorption rate of just 3.0% and compressive strength of 9,800 psi, among the highest we test for any residential paver in Canada. Lafitt Grana is a more rustic, cost-effective mid-range option for traditional homes.

Best for: large modern driveways and courtyards where big-format geometry is part of the architectural statement, and for homeowners who want the strongest lab numbers available at a given price point.

"After 15 years of GTA installs, I honestly don't have a favourite between these three. I have a favourite product for a given budget and a given look — and it changes driveway to driveway. What I don't do is install any of the three on a shortcut base, because that's what actually fails, not the brand name."

— Reliable Hardscapes, on choosing between the big three

Material cost vs. installed cost

The brand you choose affects the material line item far more than it affects your final invoice, because material is only a fraction of what you're actually paying for.

On a typical GTA driveway, paver material accounts for roughly 18–28% of the total installed cost — the rest is excavation, base prep, edge restraint, polymeric sand, and labour. That's why installed pricing clusters into tiers that cut across all three brands rather than by manufacturer:

For the full line-item breakdown of what drives these numbers — demolition, slope correction, pattern complexity, and size — see our complete interlocking driveway cost guide for the GTA. A typical two-car driveway (550–750 sq ft) using any of these three brands at mid-to-premium grade runs $14,000–$40,000 installed; the brand choice within that budget usually swings the final number by a few thousand dollars, not tens of thousands.

Ontario-specific considerations

Choosing between Techo-Bloc, Unilock, and Permacon in the GTA comes with a few local realities that don't show up in a spec sheet.

Freeze-thaw performance

The GTA sees 40–60 freeze-thaw cycles per winter, and all three brands' premium and mid-tier lines are engineered and tested to ASTM C1782 freeze-thaw cycling standards specifically because of this climate. None of the three is a warm-climate product adapted for Canadian sale — they're designed for exactly this abuse from the start.

Base prep matters more than brand

Every driveway failure we've been called to repair using a premium paver from any of these three brands has traced back to the installation, not the product — shallow base depth, poor compaction, or skipped geotextile fabric on clay soil. Our guide to interlocking base construction covers exactly what a proper 8–12 inch compacted base looks like, and our breakdown of why interlocking driveways sink walks through the failure modes we see most. Whichever brand you choose, insist on the same base spec.

Permits and installation timing

Most GTA municipalities don't require a building permit for a like-for-like driveway replacement regardless of paver brand, though a road-occupancy permit (typically $50–$200) may apply if the work extends to the curb cut — see our guide to interlocking driveway permits in the GTA for the specifics. Lead times for premium lines from all three manufacturers stretch longest during peak season (May–September), so ordering early in the year gets you first pick of colour and texture before inventory tightens.

Joint sand and sealing apply equally to all three

Once installed, polymeric sand and sealing schedules don't change by brand — see our dedicated guide to polymeric sand for interlocking driveways for re-sanding intervals and product types. A Techo-Bloc, Unilock, or Permacon driveway maintained on the same schedule will perform the same.

Common mistakes when choosing a brand

1. Assuming a higher price always means better winter performance

Permacon's mid-range Mondrea tests with lower absorption than some competitors' premium lines. Price tier correlates with design complexity and finish more than it correlates with raw durability among these three brands.

2. Picking a brand name without checking the specific line

"Techo-Bloc" alone tells you almost nothing about price or look — Industria and Blu Slate are both Techo-Bloc and span a 2–3x price difference. Always ask for the specific product line, not just the manufacturer.

3. Letting the contractor's preferred supplier decide for you

Some contractors default to whichever brand their local supplier stocks or prices best for them. That's not necessarily wrong, but it shouldn't be the only reason you end up with one brand over another — ask why they're recommending it for your specific project.

4. Forgetting that mixing brands on one surface creates visual inconsistency

Techo-Bloc, Unilock, and Permacon size and bevel their pavers slightly differently. Combining two brands across one continuous field can create inconsistent joint lines. Mixing works well when one brand is the main field and a different product forms a distinct border or banding detail — not when two brands are blended indiscriminately.

5. Treating the brand decision as more important than the installer

We've torn out failed driveways built with every premium brand on this list. The paver was never the problem. Spend at least as much scrutiny on your contractor's base prep process as you spend comparing Techo-Bloc to Unilock to Permacon.

Our recommendations by project type

Premium traditional or estate driveway

Unilock Beacon Hill Flagstone. The most convincing natural-stone look of the three, backed by Ontario's only local manufacturer.

Premium modern driveway

Techo-Bloc Blu Slate or Permacon Newport. Both deliver large-format, contemporary geometry; we lean toward Blu Slate for textured depth and Newport when the project calls for the biggest format and lowest absorption rating available.

Mid-range driveway, balanced quality and cost

Techo-Bloc Industria or Unilock Brussels Block. Decades of proven GTA performance and the broadest colour selection at this price tier.

Large modern courtyard or driveway

Permacon Newport. The big-format geometry and density make the strongest architectural statement at scale.

Budget-conscious without sacrificing durability

Permacon Mondrea or Techo-Bloc Industria. Both hold winter-grade specs well below the premium price point. For a full walkthrough of how pattern choice affects both cost and look once you've settled on a brand, see our interlocking patterns guide.

FAQs on Techo-Bloc, Unilock, and Permacon

Which paver brand is best for Ontario driveways — Techo-Bloc, Unilock, or Permacon?

There isn't a single best brand — all three are Canadian-engineered and meet the same freeze-thaw performance standards, so the right choice depends on look and budget rather than durability. Techo-Bloc offers the widest colour and texture range at every price tier. Unilock is Ontario's own manufacturer with 50+ years refining specifically for this climate and the most convincing natural-stone look in its Beacon Hill Flagstone line. Permacon consistently tests as the densest of the three, with absorption rates as low as 3.0% on its Newport line, and leads in large-format modern pavers. Any of the three installed properly will last 30-plus years in the GTA.

Is Techo-Bloc more expensive than Unilock or Permacon?

Not meaningfully — all three brands span a similar price ladder. Entry-level lines (Techo-Bloc Industria, Unilock Brussels Block, Permacon Mondrea) run roughly $5 to $10 per square foot in material cost, and flagship premium lines (Techo-Bloc Blu Slate, Unilock Beacon Hill Flagstone, Permacon Newport) run roughly $11 to $17 per square foot. Within a single brand you can spend 2 to 3 times more moving from entry to premium, which is a bigger swing than moving between brands at the same tier.

Is Permacon as durable as Techo-Bloc or Unilock in GTA winters?

Yes — if anything, Permacon's flagship Newport line tests as the densest of the three, with a 3.0% water absorption rate and 9,800 psi compressive strength, both slightly ahead of comparable Techo-Bloc and Unilock premium lines. All three manufacturers test to ASTM C1782 freeze-thaw cycling standards and have thousands of proven GTA driveway installations behind them. The durability gap in Ontario is between these three Canadian-engineered brands and unbranded budget imports, not between the three of them.

Do all three brands perform equally well in Ontario freeze-thaw cycles?

Essentially yes, within their comparable product tiers. The GTA sees 40 to 60 freeze-thaw cycles per winter, and the specs that predict survival — water absorption under 5%, compressive strength above 8,000 psi, and an ASTM C1782 passing rating — are met by every premium line from Techo-Bloc, Unilock, and Permacon. The bigger performance variable is the installation itself: base depth, compaction, and polymeric sand matter more to long-term survival than which of the three brands you choose.

Does the paver brand matter more than the installation?

No — installation matters more. We've torn out failed driveways using all three premium brands, and in nearly every case the paver itself was fine; the failure traced back to shallow base depth, poor compaction, or skipped geotextile fabric on clay soil. A mid-tier paver from any of these three brands on a properly built 8 to 12 inch compacted base will outlast a premium paver installed on a shortcut base. Choose the brand for the look and the price, then put your real scrutiny on the contractor's base prep.

Can a driveway mix pavers from two different brands?

Technically yes, but we rarely recommend it for a single driveway surface. Manufacturers size and bevel their pavers slightly differently, which can create inconsistent joint lines when two brands are combined in the same field. Mixing is more common — and works well — when one brand forms the main field and a different product (sometimes a different line from the same brand) is used for a contrasting border or banding detail, which is a standard design technique rather than a brand mashup.

Where are Techo-Bloc, Unilock, and Permacon pavers manufactured?

Techo-Bloc manufactures in Saint-Hubert, Quebec and Pen Argyl, Pennsylvania. Unilock was founded in Toronto and manufactures in Brampton, Ontario, making it the only one of the three with an Ontario-based plant. Permacon is a Quebec-based manufacturer. All three design their product lines specifically for the freeze-thaw climate of Eastern Canada rather than adapting a warm-climate product for northern sale.

Which brand should I choose for a modern vs traditional GTA home?

For a traditional or transitional home, Unilock Beacon Hill Flagstone or Brussels Block, or Permacon Lafitt Grana, deliver a tumbled, old-world look. For a modern home, Techo-Bloc Blu Slate, Unilock Umbriano, or Permacon Newport's large-format geometry reads as contemporary. Most GTA homes land somewhere in between, which is where Techo-Bloc Industria's broad colour range or Permacon Mondrea's modular sizing tend to give the most flexibility.

Choosing Between Brands?

Get an Honest Recommendation From a 15-Year GTA Contractor.

Free on-site consultation. We'll walk your property, talk through your aesthetic preferences and budget, and recommend the specific brand and product line that actually fits — no pressure, no upsell.

Book a Free Consultation

Find our guides useful? Add us as a preferred source on Google to see more of them.

★★★★★

Rated 5.0 by homeowners across the GTA

Real reviews from Google, HomeStars & more

★★★★★

“Very satisfied with their communication, attention to detail and quality of workmanship. A job well done.”

Pamela D.

Verified · Google

★★★★★

“The team exceeded my expectations with a gorgeous patio. Polite, dependable, and productive.”

William Y.

Verified · Google

★★★★★

“Every one of the boys was absolutely amazing to work with. I highly recommend them.”

Michel K.

Verified · Google

Read All Our Reviews